Fundamental Manufacturing Processes, Painting & Powder Coating
Produced By Society of Manufacturing Engineers 
Program Outline
PAINTING & POWDER COATINGS
PAINTING & POWDER COATINGS INTRODUCTION
Pigments, Additives, Resins, Solvents, Viscosity, Volatile organic compounds,
Paint formulations, Enamels, Lacquers
LIQUID PAINT COATINGS INTRODUCTION
Solution fluidization, Dispersion fluidization, Emulsion fluidization, Solventborne
coatings, Waterborne coatings, Part pretreatment & cleaning, Paint application,
Conventional air spraying, Airless spraying, Air-assisted airless spraying,
High volume, low pressure spraying, Electrostatic spraying, Electrocoating,
Paint curing, Heat crosslinking, Radiation curing
POWDER COATING INTRODUCTION
Powder resin types, Powder coating sub-systems, Mechanical pretreatment
processes, Chemical pretreatment processes, Applying powder coatings, The spray
booth, The powder recovery system, Powder coating curing, Convection ovens,Infrared
curing ovens
Study Guide
A PDF version of the video's
study guide.
Abstract
This painting & powder coating program begins with an intro to the basic
elements of all paint formulations: pigments, additives, solvents and resins.
The two types of resin polymer structures, enamels and lacquers, are explained
with an emphasis on the crosslinking aspect of enamels. The liquid paint section
examines both solventborne and waterborne high solids paints, and their type
of liquid fluidization, including either: solution fluidization, dispersion
fluidization, or emulsion fluidization. The process of applying liquid paints
is broken down into three fundamental sequences: part pretreatment and cleaning,
paint application, and paint curing. The paint application processes detailed
include: conventional air spraying, airless spraying, air-assisted airless spraying,
high volume, low pressure spraying, electrostatic spraying, and electrocoating.
The power coating section fully examines the various process sub-systems, including:
pretreatment methods to prepare the part surface for coating, the various application
systems to apply the powder, spray booths and powder recovery systems, powder
curing, to move parts through the process.
2000, 23 MIN Video
Sample Video Clip (size = 3.82 mb)
Note: This avi clip plays best on Microsoft's Windows Media Player
